Contact Phone
Contact Email
  • Australia EN
  • VitalCALL
  • Careers
  • Pay My Bill
  • Customer Portal
  • 13 15 98 (Australia)
  • Fire
    • Chubb is a national fire service provider with local branches throughout Australia
    • Fire – Home
    • Installation
      • Installation – Home
      • Design and Commission
      • Fire Detection and EVAC Systems
      • Suppression Systems
      • Vehicle Suppression Systems (PEFS)
      • Fire Extinguishers, Blanket and Hose Reels
      • Passive Fire
    • Service and Maintenance
      • Service and Repairs – Home
      • Inspection and Testing
      • Defect Management
      • 24/7 Emergency Servicing
      • Account Management
      • Customer Service Portal
      • Annual Compliance Statements
    • Fire Fighting Products and Equipment
      • Fire Fighting Products and Equipment – Home
      • Firefighting Hose
      • Couplings and Fittings
      • Nozzles and Monitors
      • Firefighting Foam
      • Foam – Fixed Systems
      • Foam – Portable Equipment
      • Hazmat Suits
      • Hazmat Accessories
      • Personal Protective Equipment (PPE)
      • Forestry Firefighting Equipment
      • FLIR Thermal Imaging Cameras
    • Emergency Plans and Training
      • Emergency Plans and Training – Home
      • Emergency Procedures and Diagrams
      • Fire Safety Training
        • Fire Safety Training – Home
        • Fire Extinguisher Training
        • Fire Warden Training
        • General Evacuation Training
        • Chief Warden Training
        • Evacuation Exercise
        • Fire Safety Adviser Course (QLD Only)
    • Fire Alarm Monitoring
    • Fire Licences, Standards and Legislation
  • Security
    • Chubb design, install, monitor and service a wide range of detection, surveillance, access control and integrated systems
    • Security – Home
    • Installation (Security)
      • Installation – Home
      • Design and Commission
      • Integrated Security
      • Video Surveillance
      • Video Analytics
      • Access Control
      • Intruder Alarms
      • High Security (Type 1A and Class 5)
      • Chubb Home Security
    • Service and Maintenance
      • Service and Maintenance – Home
      • Preventative Maintenance
      • Comprehensive Service Plans
      • 24/7 Emergency Servicing
      • Remote Connected Services
      • National Service Delivery Centre
      • Customer Service Portal
      • Security System Audit
    • Security Monitoring and Response
      • Security Monitoring and Response – Home
      • Alarm Monitoring
      • Lone Workers (SafeZone etc)
      • Remote Video Guarding
      • Remote Video Response
      • Alarm Response Services
    • Security Licences and Standards
  • Chubb visiON+

    • is an ever-growing suite of remote, connected services that’s changing how protection is managed
    • Chubb visiON+ – Home
    • visiON+ Customer Portal
    • Personal Safety App
    • Remote Maintenance
    • Remote Monitoring
  • Industries
    • Your workplace is unique. Chubb‘s qualified and experienced staff can help ensure compliance with industry requirements and address fire protection and security issues particular to your workplace
    • Industries – Home
    • Healthcare
    • Commercial and Office Buildings
    • Education
    • Government and Public Sector
    • Industrial and Manufacturing
    • Mining Oil and Gas
    • Retail
    • Data Centres
  • Resources
    • News, Case Studies, Downloads & Resources
    • Resources – Home
    • News
    • Case studies
    • Update Monitoring Contact Details
  • About
    • About Chubb
    • About Chubb – Home
    • History
    • Reconciliation Action Plan
    • Culture
      • Culture – Home
      • Values, Vision & Mission
      • Sustainability
      • Ethics & Compliance
Contact Us

Home » Fire » Fire Fighting Products and Equipment » Hazmat Accessories

HAZMAT ACCESSORIES

Home of Respirex,
leading supplier of
personal protective solutions

Discover more Discover more

Respirex Hazmat and Decontamination

Respirex International is a leading supplier of personal protective solutions, specialising in high-performance chemical, particulate and respiratory protective clothing and specialist protective footwear.

Respirex Product Range

The Respirex product range encompasses standard and customised gas tight suits, chemical splash suits and Chemical, Biological, Radiological and Nuclear (CBRN) equipment for fire and emergency services teams and emergency responders, air fed chemically protective suits and chemical work wear for the petrochemical and pharmaceutical industries, and powered air and air fed particulate suits and hoods for nuclear and pharmaceutical industries.

Protective Footwear

The Workmaster™ range of boots and overboots are made in the UK at Respirex’s state of the art automated boot factory. The injection moulding manufacturing process guarantees a seamless, leak-free construction and all Respirex boots are REACH compliant. Boots and insoles are machine washable at up to 40℃ and have a shelf-life in excess of 10 years.

Hazmax™ electro-static discharge ESD boots

A chemically protective Electro-Static Discharge (ESD) boot with an integral steel toe cap and vulcanized rubber sole for superior slip resistance. Suitable for applications such as pharmaceutical electro-protective areas.

Boot Shaft

  • Green Hazmax chemically resistant compound shaft certified to EN 13832
  • Conforms to EN 943-1 (Chemical protective clothing) and certified to this standard as part of an appropriate Respirex gas tight suit
  • Meets the requirements of NFPA 1991 (Chemical Vapour protection)
  • For use in EPA areas conforming to EN 61340-5
  • (ESD 99.6 M dry, 11.8 M wet EN ISO 20345)
  • 200 Joule Epoxy coated Steel toe cap to EN ISO 20345
  • Seamless construction
  • Kick off lug
  • Extra shin protection
  • Adjustable height
  • Ankle guard
  • Knitted nylon lining
  • Comfort insole (removable and machine washable)
  • CE marked on the shaft with date and year of manufacture
  • REACH Compliant

 

Workmaster Hazmax ESD Boots Data Sheet

Hazmax™ chemically protective boots

A chemically protective anti-static boot with an integral steel toe cap and vulcanized rubber sole for superior slip resistance.

Boot Shaft

  • Green Hazmax chemically resistant compound shaft certified to EN 13832-3
  • Conforms to EN 943-1 (Chemical protective clothing)
  • 200 Joule Epoxy coated Steel toe cap
  • Seamless construction
  • Kick off lug
  • Extra shin protection
  • Adjustable height
  • Ankle guard
  • Knitted nylon lining
  • Moisture absorbing insole (removable and machine washable)
  • Also available in black (MOQ of 500 pairs)

Boot Sole

  • Black vulcanized rubber sole for maximum grip – 30% better than a conventional safety boot sole
  • Slip resistance performance twice that required by EN 13287 SRA and SATRA TM144 standards
  • Two to three times the wear resistance of conventional soles
  • Stainless steel, penetration resistant mid-sole
  • Fuel and oil resistant
  • Greater cut resistance than conventional soles
  • Resistance to hot contact 60 seconds 300°C
  • Energy absorbing tunnel system
  • Cold insulation

 

Workmaster Hazmax Boots Data Sheet

Hazmax™ YS boots

A chemically protective anti-static safety boot with an integral steel toe cap and penetration resistant midsole.

Boot Shaft

  • Green Hazmax chemically resistant compound shaft certified to EN 13832-3
  • Conforms to EN 943-1 (Chemical protective clothing) and certified to this standard as part of an appropriate Respirex gas tight suit
  • Meets the requirements of NFPA 1991 (Chemical Vapour protection)
  • 200 Joule Epoxy coated Steel toe cap to EN ISO 20345
  • Seamless construction
  • Kick off lug
  • Extra shin protection
  • Adjustable height
  • Ankle guard
  • Knitted nylon lining
  • CE marked on the shaft with date and year of manufacture
  • REACH Compliant

Boot Sole

  • Slip resistance performance to EN 13287 SRA and SATRA TM144 standards
  • Cleated outsole for maximum grip
  • Stainless steel, penetration resistant mid-sole to EN ISO 20345 S5
  • Fuel and oil resistant to EN ISO 20345 FO
  • Energy absorbing tunnel system conforms to EN ISO 20345 E
  • Cold insulation to EN ISO 20345 CI

 

Respirex Catalogue

Chemical overboots

A chemically protective anti-static overboot with a vulcanized rubber sole for superior slip resistance.

Boot Shaft

  • Ingenious rear entry design ensures the boot is quick and easy to fit and remove
  • Ideal for personnel who have to continually enter and exit hazardous areas
  • Green Hazmax chemically resistant compound shaft certified to EN 13832
  • Conforms to EN 943-1 (Chemical protective clothing)
  • Meets the requirements of NFPA 1991 (Chemical Vapour protection)
  • Seamless construction
  • Kick off lug
  • CE marked on the shaft with date and year of manufacture
  • REACH Compliant

Boot Sole

  • Black vulcanized rubber sole for maximum grip – 30% better than a conventional safety boot sole
  • Slip resistance performance twice that required by EN 13287 SRA and SATRA TM144 standards
  • Two to three times the wear resistance of conventional soles
  • Fuel and oil resistant
  • Greater cut resistance than conventional soles
  • Resistance to hot contact 60 seconds 300°C

 

Workmaster Chemical Overboots Data Sheet

Dielectric boots

An electrically insulating dielectric boot with an integral steel toe cap and vulcanized rubber sole for superior slip resistance. The Respirex Dielectric boot provides high voltage protection of up to 20kV over the complete boot for over 8 hours, and 35kV over the sole for 3 minutes.

Boot Shaft

  • Yellow dielectric compound shaft
  • 200 Joule Epoxy coated Steel toe cap to EN ISO 20345
  • Seamless construction
  • Kick off lug
  • Extra shin protection
  • Adjustable height
  • Ankle guard
  • Non-wicking knitted nylon lining
  • Comfort insole (removable and machine washable)
  • REACH Compliant

Boot Sole

  • Blue vulcanized rubber sole for maximum grip – 30% better than a conventional safety boot sole
  • Slip resistance performance twice that required by EN 13287 SRA and SATRA TM144 standards
  • Cleated outsole for maximum grip
  • Two to three times the wear resistance of conventional soles
  • Fuel and oil resistant
  • Greater cut resistance than conventional soles
  • Resistance to hot contact 60 seconds 300℃
  • Energy absorbing tunnel system conforms to EN 20345 E
  • Cold insulation to EN ISO 20345

 

Workmaster Dielectric Boots Data Sheet

Dielectric Brochure

Dielectric overboots

An electrically insulating dielectric overboot approved to current European standards with a vulcanized rubber sole for superior slip resistance. The Respirex dielectric boot provides high voltage protection of up to 20kV over the complete boot for 8 hours.

Boot Shaft

  • Ingenious rear entry design ensures the boot is quick and easy to fit and remove
  • Ideal for personnel who have to continually enter and exit hazardous areas
  • Yellow dielectric compound shaft
  • Seamless construction
  • Kick off lug
  • REACH Compliant

Boot Sole

  • Blue vulcanized rubber sole for maximum grip – 30% better than a conventional safety boot sole
  • Slip resistance performance twice that required by EN 13287 SRA and SATRA TM144 standards
  • Two to three times the wear resistance of conventional soles
  • Fuel and oil resistant
  • Greater cut resistance than conventional soles
  • Resistance to hot contact 60 seconds 300°C

 

Workmaster Dielectric Boots Data Sheet

Kemblok™ Gloves

Manufactured using a high-performance seven-layer chemical barrier laminate material, Kemblok™ gloves provide excellent protection against a wide range of chemicals, including warfare agents and biological hazards.

Kemblok™ Gloves

Manufactured using a seven-layer chemical barrier laminate material, Kemblok™ gloves provide excellent protection against a wide range of chemicals including warfare agents and biological hazards.

  • Protection against chemicals and micro-organisms to EN 374-1:2003
  • Can be worn as a liner under heavier gloves providing mechanical protection
  • Lightweight and comfortable
  • Compatible with the Permasure™ toxicity modelling web application which calculates safe working times for over 4,000 chemicals
  • Working temperature -40C to 70C
  • Silicone and latex free
  • REACH compliant

 

Kemblok Glove Data Sheet

Koolvest

The Respirex Koolvest™ is an innovative product conceived specifically to provide comfortable cooling to an individual in circumstances of increased temperature.

Koolvest

The Respirex Koolvest™ is an innovative product conceived specifically to provide comfortable cooling to an individual in circumstances of increased temperature.

  • Manufactured in Proban® flame retardant material with 100% cotton shell
  • Absorbs heat generated by the wearer and maintains a comfortable cooling level of 65°F/18°C
  • Can be worn directly against the skin
  • One size fits all vest which is pulled tight to the body with adjustable straps.
  • Machine washable
  • Four internal pockets with hook and loop fastener tabs to contain the pre-charged KoolPacks.
  • KoolPacks contain a safe, non-toxic, non-flammable semi-solid thermal energy storage material
  • KoolPacks are simple to recharge in a fridge, portable cooler or even iced water
  • Vest supplied complete with 4 KoolPacks.
  • Single KoolPacks also available

PROBAN® is a registered trademark of Solvay Operations

 

Koolvest Data Sheet

Decontamination Shower

MFC International offer a range of decontamination showers for single, four and mass groups of people.

Decontamination Shower’s

Lightweight and quick to deploy, the inflatable Decontamination Shower range from MFC Survival allow for rapid response.

Fully inflatable, these Decontamination Showers can be set up in a matter of minutes, and will stay standing without continuous inflation. With no mechanical framework the shelters are lightweight to transport and compact to store. The Decontamination Showers come in two different styles, with gloves or without gloves.

Optional raised floor panels prevent contact with contaminated shower wash-off, which is collected in a PVC chemically resistant sump. Sleeves for pumped extraction of contaminated water are included as standard.

Showers can be used on hard or soft standing, and guy ropes are provided for securing in position during inclement weather.

  • Light weight and compact
  • Rapid Inflation and deployment
  • Low Maintenance
  • Integral multi-nozzle shower systems for wash and rinse
  • Wash brush hose connection fittings
  • Clear PVC Doors

 

Single Decontamination Shower Data Sheet

Four Person Decontamination Shower Data Sheet

Mass Decontamination Shower Data Sheet

Body Bags

A gas tight body bag, designed to contain chemically contaminated mortalities and body parts after a CBRN incident.

Body Bags

A gas tight body bag, designed to contain chemically contaminated mortalities and body parts after a CBRN incident.

  • Manufactured with a DuPont™ Tychem® TK shell, which provides excellent protection against a broad range of chemicals
  • Provides a physical barrier to particulate, liquid, vapour and gas materials with a minimum breakthrough of 48 hours
  • Lightweight material for ease of storing, transporting and handling
  • Durable material with an abrasion resistant reinforced PVC base
  • Enhanced CBRN filter (3M JFR-85) allowing gasses produced by the body as part of the decomposition process to pass out of the bag
  • Shut off valve over CBRN filter exhausts
  • Sturdy carrying straps allow up to four people in PPE to assist with lifting and carrying
  • Absorbent pads in the bottom of the bag capable of holding more than five litres of fluid
  • Heavy duty gas-tight zip around three sides of the bag for ease of access, fitted with DuPont™ Viton® ring on slider for ease of use when wearing CPPE gloves
  • Disposal by means of either cremation or burial
  • Clear hazard warning signs identifying the type of CRBN hazard within the bag
  • Two waterproof A4 pouches to allow identification paperwork to be attached to the body bag
  • Clear viewing window to allow relatives to view the deceased

DuPont™, Tychem® and Viton® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company.

 

Body Bag Data Sheet

Contact Us For
Information On The
Product Range

Contact us Contact us

Installation

Chubb has experienced and accredited technicians who can design, install and maintain your fire systems and portable fire equipment.

Installation (Fire) Installation (Fire)

Service And Maintenance

Having a service and maintenance contract in place for your fire equipment is essential for ensuring your system works when you need it most.

Service and Maintenance (fire) Service and Maintenance (fire)

Emergency Plans And Training

As part of workplace WHS regulations, all buildings must have an appropriate emergency plan in place to protect employees, contractors, site visitors and customers.

Emergency Plans and Training Emergency Plans and Training

Fire Alarm Monitoring

Fire alarm monitoring and regular maintenance are critical to help protect your people, property and assets.

Fire Alarm Monitoring Fire Alarm Monitoring

Fire Licences, Standards And Legislation

Chubb Australia holds an industry licence to install and maintain fire sprinkler systems as specified by Australian Standards.

Fire Licences, Standards and Legislation Fire Licences, Standards and Legislation

We are here to help you.
Call or email our team
of experts today.

Contact us Contact us
Chubb
Quick links
  • Fire
  • Security
  • Chubb visiON+
  • Industries
  • Resources
  • About
  • News
  • Contact us

Chubb Fire & Security Pty Ltd | ABN 47 000 067 541

MASTER LICENCES: 410089562 (NSW) | 17502015 (ACT) | ISL 225493 (SA) | 27464 (WA) | 693-772-70S, 693-772-12S (VIC) | 3337754 (QLD)

©2023 Chubb Fire & Security. All Rights Reserved.

  • Privacy notice
  • Terms and conditions
  • Terms of use
  • Whistleblower policy
  • Sitemap

Follow us

  • Linked In
Chubb

Oops! We could not locate your form.

Chubb Fire Protection Enquiry

Use the form below to send us an enquiry or call us on:

13 15 98

For enquiries NOT relating to Fire Protection, please select the correct area on our Contact Us page.

Your details

How would you like us to contact you?
Are you an existing Chubb customer?
Privacy(Required)
Google reCAPTCHA logo Privacy Policy and Terms of Service apply.

A global organisation

Chubb’s global footprint, and local expertise is reflected in its
12,000+ team, working from 200+ offices across 17 countries.

Get in touch with our regional offices

Locations
Chubb

Follow us

  • Linked In
Chubb
Enter the Chubb UK website
  • VitalCALL
  • Careers
  • Pay My Bill
  • Customer Portal
  • 13 15 98 (Australia)